Place of Origin:
China
Brand Name:
ceres,YY
Model Number:
362 ceres
UV solidification and ultraviolet rays resistant. Convenient use,
low thickness reduce for good print quality.
Attention:
1. Before installation pleasure measure the thickness of blanket for adjusting the
press accurately.
2. While installation please use the constant wrench to tighten gradually.
3. After installation please clean the rubber surface and ready for print.
4. During the use please often use the special solvent to clean the rubber surface
for extend the useful time.
| Color | Red |
| Artical NO. / Thickness | 366: 0.077"/ 1.96mm |
| Elongation at 500N/ 50mm | ≤0.9% |
| Compressibility at 1350kPa | approx. 9% |
| Tensile strength | ≥4500N/ 50mm |
| Hardness total | approx. 78 Shore A |
| Surface rubber | approx. 58 Shore A |
1. EPDM surface compound resistant to UV inks and aggressive washing solutions
2. Extremely resistant compressible layer
3. Low dot gain
4. Best contrast values
5. Outstanding results in solid and half-tone printing
Send your inquiry directly to us
